PRODUCT INFORMATION FOR POWERFLEX MOTORSPORT UNIVERSAL RANGE OF BUSHES
POWERFLEX Motorsport bushes have been developed to fulfil the demands of motorsport engineers and specialist car builders, both amateur and professional.
These bushes are manufactured solely with performance in mind for those who demand the very best.
They are available in a range of universal sizes enabling the engineer to design and manufacture the component to the bush or modify the bush to the component.
PLEASE NOTE WE WILL ONLY BE ABLE TO SUPPLY THE UNIVERSAL RANGE OF BUSHES IN OUR PURPLE 80 SHORE MATERIAL UNTIL FURTHER NOTICE.
They are supplied in a PURPLE Shore A, 80 material, which is durable enough for high stresses but does allow the slight deflections and misalignments, which occur during suspension movement. There are three types of kit available. The 100 Series kits consist of three components, the 200 Series, two components and the 300 Series, two also.
100 Series: Two "top-hat" polyurethane components and one stainless steel sleeve. The sleeve is supplied over-length and with a pilot bore only. The sleeve can then be machined to length and drilled to the correct bolt size for fitment. The 200 Series kits are two POWERFLEX "washers". The 300 Series consists of two universal anti roll bar mounts.
Typical applications for the 100 Series range are:
- Swinging arm location.
- Wishbone ends.
- Shock absorber "eye" mounts.
- Engine steady bars
- Axle location
Typical applications for the 200 Series range are:
- Body panel spacers
- Shock absorber top mounts
- Vibration absorbing washers
- Shock absorber travel limiters
Typical applications for the 300 Series range are:
- Anti-roll bar mount
This range of bushes has been developed so that additional machining to size can be carried if required.
